Callsign and Text Bar for Radio Rack Mounts

Personalize your shack with a custom text bar. Most people will get their callsign, but you fill up the width of the rack - up to 16 characters (including spaces). Note: If you have clock(s) added to the rack, then there will be correspondingly less space for characters on your custom rack.

radio rack with clock and text

If you need more characters please call us for a custom quote. Everything is custom outside of our "On the Air" Clock Radio Rack.

Text bars can be illuminated by Green, Blue or Red LEDs.

Check out examples of our text bars below:

Company/Facility/Custom Name

On the Air (In Stock)

On the Air Custom Text Bar

Custom FDNY box

Custom Callsign and Company name.

Custom Callsign and clocks.

NovexComm Newsletter

Yuma Hamfest 2020

Random Rack

6 Pak Rak


6 Pak Rak

Size: NA

The idea is designed around the case to mount 6 of these high powered digital/ analog repeaters into an open-frame rack cage for compressed installations where space is at a premium since building site owners charge by the rack-unit of space this saves money by not paying for more rack space.

The 6PakRak puts 6 repeaters into only 9 vertical inches of rack space, no screws to remove to get a repeater out for service or add one to the frame; just slide it in on the factory-supplied "rack ears" that come with it.

You save even more money since the 6PakRak costs only $300 (the price of one FR5000 type of Icom housing) but now you don't need 2 more of them to house the 6 repeaters at 2 units per housing; so it saves you $600 to start with.

When the tech goes to fix one just slide one out & another slides right in. Great for fast restoral of service when a repeater goes down.

Cooling is important and with the open-frame design of the 6PakRak you can put a rack fan underneath it and cool the repeaters to allow 100% duty cycle operation at full power. You can't get that inside of the housing as they must be run at half-power to last. This extends the life of the radios substantially.

The 6PakRak comes disassembled and packed flat to save money on shipping too. Unpack and tighten the screws for a fast 10-minute easy setup.

Want to know more or order one? Please contact us today!

Shop for more products in our store by clicking here.

Rack Mount Your Radios

NovexComm provides low-cost, professional rack mounts for many popular radios, giving operators a source for off-the-shelf, low cost radio rack mount kits.

Why Rack Mount Radios?

Here are just a few reasons given by some of the operators we have heard from
  • Gives my radio room a professional look.
  • Saves space so I can buy more radios and have a place to keep them.
  • Makes it easier to access and use my equipment all in one place.
  • Keeps my gear protected from bumps and scratches.
  • If someone breaks into my house, then they will have a difficult time getting my radios.
  • I finally have all those ugly wires out of sight, looks great.
  • My wife likes the way my shack looks; she even shows her friends my room.


WA5RAY Testimonial:
Thanks Novexcomm for your great products. I was trying to rack mount my radio equipment into my console racks and was failing miserably. Luckily, I ran across your ad and have since successfully rack mounted several units very easily. The chassis design of your system for the larger rigs moves the weight of the actual radio equipment from the front panel and transfers it to the rack through your integrated chassis shelf. This greatly helps installing, removing and working on the gear. It also reduces the rattles that come from the stresses from the weight of the gear that is supported entirely from the single panel itself. Very COOL indeed! Thanks again for being there for a guy in need.

Copyright ©