The 6PakRak puts 6 repeaters into only 9 vertical inches of rack space, no screws to remove to get a repeater out for service or add one to the frame; just slide it in on the factory-supplied "rack ears" that come with it.
You save even more money since the 6PakRak costs only $300 (the price of one FR5000 type of Icom housing) but now you don't need 2 more of them to house the 6 repeaters at 2 units per housing; so it saves you $600 to start with.
When the tech goes to fix one just slide one out & another slides right in. Great for fast restoral of service when a repeater goes down.
Cooling is important and with the open-frame design of the 6PakRak you can put a rack fan underneath it and cool the repeaters to allow 100% duty cycle operation at full power. You can't get that inside of the housing as they must be run at half-power to last. This extends the life of the radios substantially.
The 6PakRak comes disassembled and packed flat to save money on shipping too. Unpack and tighten the screws for a fast 10-minute easy setup.
Want to know more or order one? Please contact us today!
NovexComm provides low-cost, professional rack mounts for many popular radios, giving operators a source for off-the-shelf, low cost radio rack mount kits.
Thanks Novexcomm for your great products. I was trying to rack mount my radio equipment into my console racks and was failing miserably. Luckily, I ran across your ad and have since successfully rack mounted several units very easily. The chassis design of your system for the larger rigs moves the weight of the actual radio equipment from the front panel and transfers it to the rack through your integrated chassis shelf. This greatly helps installing, removing and working on the gear. It also reduces the rattles that come from the stresses from the weight of the gear that is supported entirely from the single panel itself. Very COOL indeed! Thanks again for being there for a guy in need.